Meguiar's Mirror Glaze® Professional Ultra Pro Speed Compound (M11032)

CHARACTERISTICS

Ultra Pro Speed pairs strong defect removal with excellent clarity, reducing cycle time and steps. Its advanced abrasives offer a long working time, easy wipe-off and uniform cut on OEM and refinish clear coats. It tackles heavy swirls, light RIDS and haze, leaving a clean surface; for a true “show car” result, follow with M210 Ultra Pro Finishing Polish and apply your preferred protection.

Key features

Rapid cut with clean, glossy finish
Very low dust, easy wipe-off
Long working time, high control
Compatible with rotary and DA
Targets P1200+ sanding marks, oxidation and swirls
Recommended follow-up: M210

Overview

Application (summary)
Work in the shade on a clean, cool panel; shake well; one panel at a time.

Rotary: wool/foam cutting pad, 1,200–1,800 rpm, 50×50 cm sections, cross-hatch passes; moderate then light pressure; microfiber wipe-off.
DA: DFC5/DFC6 foam pad, 4,800–5,800 OPM, 50×50 cm sections; 2–3 moderate passes + 1–2 light passes; microfiber wipe-off.
Finish with M210.

Important notes & Wrapping

Do not use the compound on films (vinyl) or matte/satin finishes.
For wrapping jobs, use M110 only as pre-install paint correction; then perform a thorough degrease (IPA/panel wipe).
For improved edge adhesion (arches, edges, recesses) use a dedicated adhesion promoter per the film maker’s guidance; apply with a quality microfiber cloth.
Avoid hot panels and direct sunlight.