3M Stamark™ Temporary Removable Road Marking Tape 650 series

• Material: Durable film available in adhesive and non-adhesive versions.
• Color: Yellow for high visibility.
• Application: Temporary placement on road surfaces.
• Removability: Both versions can be easily removed without leaving residue.

Recommended Adhesive for the Non-Adhesive Version
For optimal application of the non-adhesive version, use 3M Stamark Surface Preparation Adhesive P50.

Benefits

• Versatility: Suitable for temporary marking in construction zones, events, or traffic diversions.
• Safety: Yellow color enhances visibility even in low-light conditions.
• Ease of Use: The adhesive version allows for immediate application, while the non-adhesive version can be applied using the recommended adhesive.
• Durability: Resistant to traffic and environmental conditions for short-term use.

Typical Applications

• Lane delineation in construction zones.
• Temporary road marking in modified traffic areas.
• Parking zones or temporary pedestrian pathways.

Usage Instructions

1. Thoroughly clean the surface before application to ensure optimal adhesion.
2. For the adhesive version, place the film directly along the desired path.
3. For the non-adhesive version, apply 3M Stamark Surface Preparation Adhesive P50 first, then position the film.
4. Ensure the edges are firmly secured to prevent lifting.
5. To remove the film, gently lift it without leaving residue.

Warnings

• This product is intended for temporary use only.
• Avoid application on incompatible or contaminated surfaces.
• Refer to 3M guidelines for optimal use.

Note: This product is part of 3M's range of temporary pavement marking solutions, designed to provide safety and reliability in temporary traffic scenarios.