Shipping in 48/72h all over the World 
Newsletter
English
The images, colours and finishes on screen are approximate. For the real representation of the product always check the sample or the colours folder.
ORALITE 5400-030 Red
CODE: 18643 Roll width 1235 mm
The images, colours and finishes on screen are approximate. For the real representation of the product always check the sample or the colours folder.
Price range for linear meters purchased (lm = linear meters)
* Length of the original roll = 50 m, in case of order with greater lengths, additional lengths will be sent.
Enter the desired linear meters
ORALITE® 5400 Commercial Grade are weatherproof, self-adhesive retroreflective films with a high level of flexibility and an excellent corrosion and solvent resistance. The retroreflective system of the ORALITE® 5400 Commercial Grade consists of catadioptric glass beads which are embedded in a transparent layer of plastic material (classification RA1, design A, former Type I). The smooth surface has a high scratch resistance and a good printability. The minimum reflection data corresponds to the EN 12899-1. The daylight colours correspond to the international norms for reflective materials of this class.
OverviewFront Material
Special cast PVC film
Release Paper
PE-coated silicone paper. Product codes and batch numbers are printed on the backside of the liner. With help of these, all production parameters and raw materials can be traced.
Adhesive
Solvent polyacrylate, permanent.
Area of Use
ORALITE® 5400 Commercial Grade was especially developed for the manufacture of guidance and information signs as well as for reflective advertising art, which are intended for a short-term outdoor use and which require just a minimum of retroreflection. The ORALITE® 5400 has an adhesive with an excellent adhesion on metallic surfaces as aluminium and zinc coated steel plate. The sheeting can be screen printed with ORALITE® 5018 Screen Printing Ink or inkjet printed with most solvent based inks, UV- or Latex inks. Please refer to the chosen ink manufacturer’s instructions to determine if an application laminate is required. If required, it is recommended that the material is laminated with ORAGUARD® 290F or ORAGUARD® 293F in order to provide increased UV protection. When using non-ORAFOL inks or printers, the application must be tested and approved by the customer. Please confirm the national regulations for use of reflective sheeting.
Data sheet- Article Information
- Applications Instructions
- Technical data sheet
- Application instructions
- Article information
-
4011363881119
-
30037651
