Shipping in 48/72h all over the World 
Newsletter
English
The images, colours and finishes on screen are approximate. For the real representation of the product always check the sample or the colours folder.
ORALITE 5500-030 Red
CODE: 21608 Roll width 1235 mm
The images, colours and finishes on screen are approximate. For the real representation of the product always check the sample or the colours folder.
Price range for linear meters purchased (lm = linear meters)
* Length of the original roll = 50 m, in case of order with greater lengths, additional lengths will be sent.
Enter the desired linear meters
ORALITE® 5500 Engineer Grade are weatherproof, self-adhesive retroreflective films with excellent corrosion and solvent resistance. The product was especially developed for the manufacture of traffic control, guidance, information and warning signs as well as for reflective lettering, numbers and symbols, which are intended for long term outdoor use.
OverviewProduct Construction
ORALITE® 5500 Engineer Grade is composed of an alkyd resin film. Its retroreflective system consists of catadioptric glass beads which are embedded in a transparent layer of plastic material.
Retroreflectivity
ORALITE® 5500 Engineer Grade comply with EN12899-1 (RA1; design A) and ASTM D4956 (type I). The required minimum retroreflection values are shown in Tables 1 and 2 respectively. When using ORALITE® 5500 Engineer Grade, the relevant national specifications have to be complied with. ORAFOLrecommends you obtain the current requirements from your local authority and ensure product conformance with suchrequirements. Please contact ORAFOL for further information.
Colour
ORALITE® 5500 Engineer Grade is available in white (010), yellow (020), red (030), orange (035), blue (050), green (060), brown (080) and black (070). The colours at daylight comply with the specifications of DIN 6171 and EN12899-1 for this class of retro reflectivity.
Adhesive
Solvent polyacrylate, permanent adhesive specially formulated for the application on metallic surfaces such as aluminium and zinc coated steel plate. The adhesive is protected by a release liner made of PE coated silicone paper, 150 g/m2
Printing
ORALITE® 5500 Engineer Grade is suitable for screen printing. ORALITE® screen printing inks series 5010 and 5018 are recommended. A transparent coating is not necessary. Please refer to the Practical Information #4.2 published by ORAFOL for full instructions.
Application
ORALITE® reflective films series 5500 Engineer Grade were especially developed for traffic control and lettering applications. Please refer to the Practical Information #4.2 published by ORAFOL for full instructions. For other applications the user is fully responsible for evaluating the suitability of the product, and for any risks associated with that use. Please contact your ORAFOL Reflective Solutions Division representative for advice.
Note: The batch traceability according to ISO 9001 is possible on the basis of the roll number
-
4011363881560
-
30036415
